The DCTX Mk2 is a compact, high-energy, capacitive discharge Blasting Machine specifically designed for Energetic Breaching. It has Dual Combination output that fires dual-prime shock tube, as well as EBCs and Electric Breech – all selectable from the Power Switch. The compact body can fit in a radio pouch (or similar) and requires just one hand to operate.
Electric Blasting Caps (EBC); Electric Breech; Shocktube
For discrete operation, a haptic response indicates when the unit is armed, and ready to fire
385 VDC @ -11 Joules
| US Standard | US Coal/Oil | US Seismic | |
|---|---|---|---|
| EU Class 1 | EU Class 2 | EU Class 3 | EU Class 4 |
| 81 | 69 | 43 | 7 |
*Actual results may vary depending on detonators wire, and other factors. Parallel firing not recommended
Safely fires an Electric Breech; voltage releases in <250ms
Single or Dual-Prime, 3mm shock tube
Replaceable plasma emitters; up to 50 shots each
| Type | 2x Panasonic CRI23A cells (not included) |
| Life | -300 shots (user replaceable) |
-13° to 158°F (-25° to 70°C)
Testing circuit current limited to less than 1mA; protected by fast-blow, 50mA fuse (max allowable testing current)
Testing circuit is integrated with Push Posts, providing real-time metering of attached blasting load (except while firing)
CT (Circuit Test) LED lights solid to visually confirm continuity, and flashes to indicate excessive load.
IP67 compliant-fully submersible to 1 meter for 30 minutes
Four LEDs integrated into the top membrane keypad indicate primary functions, and are three-level dimmable.
2.4" wide x 5.7" long x 1.3" thick (6.1 cm x 14.5 cm x 3.3 cm)
11.5 ounces with batteries (326g)
Grass-filled Nylon, and rubber-booted, vandal-proof switch buttons